November 13, 2011
Cape Coral resident Ryan Tronchet won’t get $468 back from the city as part of its plan to help homeowners who replaced Chinese drywall by waiving their permit fees, the City Council decided Monday.
City officials agreed that he presented evidence that he owned the home and had a Chinese drywall problem. He said he had headaches and rashes that cleared up after the drywall was replaced in 2010.
But it was a concern that many others would apply for the refund and that Tronchet’s remediation was done before the city adopted the program that hurt his cause.
“My fear here is the floodgate that will open. There are many people out there who fit our criteria,” Councilman Marty McClain said. “This will not be the last one if we approve this.”
Tronchet was just the second resident to ask for the waiver since the council created the program in June.
The vote was a 4-4 decision with Councilmen McClain, Derrick Donnell, Erick Kuehn and Kevin McGrail voting against the motion to pay Tronchet.
“I just want to be treated equally,” Tronchet said. “I wouldn’t be here if it wasn’t for this resolution.”
The waiver program expires June 30, 2015, unless extended by council. Homeowners who qualify must have continuously owned the home and applied for the original building or construction permit anytime from 2003 to 2010.
Millions of sheets of Chinese drywall imported mainly between 2004 and 2008 emitted a foul smell and sulfur compounds that corroded air conditioning coils, electrical wiring, appliances, jewelry and other metal items in the home.
The drywall was found in thousands of homes in 41 states and Puerto Rico. In Lee County, at least 1,500 homes were affected.
Cape Coral issued 330 permits worth about $160,000 for Chinese drywall remediation, said city building official Paul Dixon.
Most of those permits were acquired by “foreclosure vultures and real estate flippers” who won’t qualify for the waiver, said Councilman Chris Chulakes-Leetz.
The money to cover the waivers has to come from the general fund, said Councilman Kevin McGrail. There has to be a starting point for the city’s programs, he said.
The $50,000 saved by the city when it changed its membership status in the Southwest Florida Regional Planning Council could be used to pay Tronchet, said Chulakes-Leetz, who assisted Tronchet with his appeal for the money.
“It’s up to us to step up to the plate and take some of the responsibility that we should,”said Councilman Pete Brandt.
The city’s inspectors missed the problem and issued a certificate of occupancy, Brandt said.
• John P. Lapotaire, CIEC
• Certified Indoor Environmental Consultant
• Microshield Environmental Services, LLC
• www.Microshield-ES.com
Share this with the #IAQS:
Leave a Comment » |
Residential IAQ | Tagged: air quality, ASTM, Chapter 468, ciec, Department of Business and Professional Regulation, Florida DBPR, Florida Statutes, HB 4171, HB 5005, HB 5007, healthy home, House Bill 713, IEQ 3.2, IESO, indoor air quality, Indoor Environmental Standard Organization, john lapotaire, John P. Lapotaire, LEED, microshield, mold, mold inspection, mold pretreatment, mold prevention, mold remediation, mold removal, mold testing, Mold-Related Services Licensing Program, new home mold, Part XVI, PCB BCAS 11-01, Residential Mold Assessment, SB 1244, Senate Bill 2234, USGBC |
Permalink
Posted by John P. Lapotaire, CIEC
November 13, 2011
The symptoms started the day Maj. Todd Hutchinson moved into his new office at the Titusville Police Department’s headquarters: constant coughing, sore throat, stuffy nose.
“It was similar to hay fever,” said Hutchinson, who had been promoted to take over the department’s administrative services division. “I assumed it was allergies, but I suspected the building.”
Hutchinson and his predecessor, Maj. Doug Massey, knew there were problems with the 37,000-square-foot building at 1100 John Glenn Blvd. The roof has leaked since the 2004 hurricanes, and the department has requested repairs every year since.
The money was never available, however, until this year: In September, contractors patched the roof.
But it sprung two fresh leaks during the Columbus Day weekend storm that dumped 1 foot of rain on parts of Brevard County. Hutchinson walked into his office, and the carpet squished under his feet: It was saturated with water.
For police officials, it was the last straw — a sign that couldn’t be ignored.
An expert’s testing revealed that mold had been festering beneath the carpet and in the walls “for years,” Hutchinson said. The air quality in his office was deemed hazardous.
Five offices, including the Chief Anthony Bollinger’s, were sealed Monday morning as workers started to perform emergency repairs: new carpets, ceiling tiles, sheetrock. Five other offices and the records division require cleaning and will be temporarily relocated. There is no timetable for the fixes to be completed.
City officials declined to estimate the financial impact. Several employees, including Hutchinson, also plan to seek funding for medical bills through workers’ compensation insurance.
Tom Abbate, the city’s support services director, said interior repairs have been made “piecemeal” since 2004. But extensive work couldn’t be done until the roof was fixed.
“The police building is a high-maintenance building, and we do as much as we can with the funding available,” Abbate said. “But whatever this costs, we have to take care of it. It’s not a discretionary item.”
Most of the problems are confined to the east side of the building, which was built for Lockheed in 1984. The city paid $2 million for it in 1997.
Hutchinson said the public shouldn’t be affected.
“We are in the business of dealing with crises,” Hutchinson said. “We’re using our training to work through this.”
Written by Andrew Knapp | FLORIDA TODAY
http://www.floridatoday.com/article/20111101/NEWS01/311010014/Mold-drives-Titusville-police-staff-from-offices
• John P. Lapotaire, CIEC
• Certified Indoor Environmental Consultant
• Microshield Environmental Services, LLC
• www.Microshield-ES.com
Share this with the #IAQS:
Leave a Comment » |
Commercial IAQ, Residential IAQ | Tagged: air quality, ASTM, Chapter 468, ciec, Department of Business and Professional Regulation, Florida DBPR, Florida Statutes, HB 4171, HB 5005, HB 5007, healthy home, House Bill 713, IEQ 3.2, IESO, indoor air quality, Indoor Environmental Standard Organization, john lapotaire, John P. Lapotaire, LEED, microshield, mold, mold inspection, mold pretreatment, mold prevention, mold remediation, mold removal, mold testing, Mold-Related Services Licensing Program, new home mold, Part XVI, PCB BCAS 11-01, Residential Mold Assessment, SB 1244, Senate Bill 2234, USGBC |
Permalink
Posted by John P. Lapotaire, CIEC
November 13, 2011
The Air Conditioning Contractors of America Educational Institute (ACCA-EI) Standards Task Team (STT) announces an American National Standards Institute (ANSI) 3rd public review period for a new standard “Existing Home Evaluation and Performance Improvement.” This third public review period, started on November 4, 2011, will close at 5:00pm Eastern Time on December 4, 2011.
Read More
https://www.acca.org/archives/news-and-media/news-room/press-releases/5921
• John P. Lapotaire, CIEC
• Certified Indoor Environmental Consultant
• Microshield Environmental Services, LLC
• www.Microshield-ES.com
Share this with the #IAQS:
Leave a Comment » |
Commercial IAQ, Residential IAQ | Tagged: air quality, ASTM, Chapter 468, ciec, Department of Business and Professional Regulation, Florida DBPR, Florida Statutes, HB 4171, HB 5005, HB 5007, healthy home, House Bill 713, IEQ 3.2, IESO, indoor air quality, Indoor Environmental Standard Organization, john lapotaire, John P. Lapotaire, LEED, microshield, mold, mold inspection, mold pretreatment, mold prevention, mold remediation, mold removal, mold testing, Mold-Related Services Licensing Program, new home mold, Part XVI, PCB BCAS 11-01, Residential Mold Assessment, SB 1244, Senate Bill 2234, USGBC |
Permalink
Posted by John P. Lapotaire, CIEC
November 13, 2011
Toxic chemicals can be found everywhere we look. Whether they are in your home, or the ground underneath, it is important to be aware of chemicals with which you and your family may come in contact.
What is asbestos?
Asbestos is a naturally occurring mineral that was incorporated into more than 5,000 products in the 1980’s. This mineral has excellent insulating and fireproofing characteristics which is why it was commonly used for commercial purposes. This toxic mineral can be found in various deposits throughout the world; the environmental hazard surrounding asbestos still exists today.
Where has it been used?
As previously mentioned, asbestos has been used in thousands of products. Some of these products include household items, paper goods, automobiles, heating and cooling systems, and even in the construction materials used to possibly build your house. The majority of these materials are commonly found in construction materials used to in buildings and homes. Asbestos has such a high resistance to heat it was used in many heating systems and insulation. High concentrations of airborne asbestos can occur after these materials are disturbed by improperly trying to remove the materials or a remodeling project.
Why is it toxic?
Mesothelioma is a rare form of cancer almost exclusively caused by asbestos exposure. Due to a severe latency period of symptoms ranging between 20 and 50 years from the time of exposure, mesothelioma cancer is often diagnosed in a late stage of development.
This tendency for late diagnosis often complicates mesothelioma treatment options; as a result, the average mesothelioma life expectancy is 4 to 18 months. There is no cure for this cancer; but, some patients who were diagnosed early enough have survived mesothelioma. For this reason, it is important for anyone exposed to asbestos to seek regular medical exams to check for signs of asbestos disease.
The best way to prevent exposure to asbestos is to learn about it, however regardless of the knowledge that is now available, not everyone takes the proper precautions that are needed to prevent exposure. Prevention in the workplace can be as simple as wearing protective gear or breathing devices. Since so many homes were built with asbestos containing products, the majority of household exposure comes from renovations, or do-it-yourself home projects. Once the asbestos is disturbed you are at risk for exposure, so it is important to have professionals involved, or the areas tested for asbestos in advance.
The Mesothelioma Center at Asbestos.com was created to assist patients affected by asbestos-related disease. Visit www.asbestos.com for more information regarding asbestos exposure. You can “like” us on Face book and “Follow” us on Twitter for daily updates and news articles surrounding asbestos and asbestos related diseases.
• John P. Lapotaire, CIEC
• Certified Indoor Environmental Consultant
• Microshield Environmental Services, LLC
• www.Microshield-ES.com
Share this with the #IAQS:
Leave a Comment » |
Commercial IAQ, Residential IAQ | Tagged: air quality, ASTM, Chapter 468, ciec, Department of Business and Professional Regulation, Florida DBPR, Florida Statutes, HB 4171, HB 5005, HB 5007, healthy home, House Bill 713, IEQ 3.2, IESO, indoor air quality, Indoor Environmental Standard Organization, john lapotaire, John P. Lapotaire, LEED, microshield, mold, mold inspection, mold pretreatment, mold prevention, mold remediation, mold removal, mold testing, Mold-Related Services Licensing Program, new home mold, Part XVI, PCB BCAS 11-01, Residential Mold Assessment, SB 1244, Senate Bill 2234, USGBC |
Permalink
Posted by John P. Lapotaire, CIEC
October 26, 2011
By ARAcontent
Posted: Oct. 12, 2011 | 1:11 a.m.
Updated: Oct. 12, 2011 | 3:10 a.m.
When the winter winds start to howl, it’s a natural response to want to close your home up tightly. To stay warm and avoid wasting energy, you close the windows – or even seal them with window film — find ways to stop air from leaking in through cracks and under doors, and then put your heating system to work. But when those instincts kick in, remember that what you’re doing is sealing air inside your home.
There’s a definite upside to sealing your house up well for the winter: you’ll stay warmer, with less impact on your energy bills. However, the downside is that those actions can negatively affect the quality of the air you’ll be breathing. It’s a particular concern because of the increased amount of time people spend indoors through the winter.
Heating, ventilation and air conditioning (HVAC) systems have been shown to act as a collection source for a variety of contaminants that have the potential to affect health, such as mold, fungi, bacteria and very small particles of dust. According to the U.S. Environmental Protection Agency, indoor air can be two to five times more polluted than outdoor air.
“When you flip that switch on your heater, there is a lot of dust and debris – collected in the coils over the summer months – that either burns into fumes or gushes into the house through your vents,” says Aaron Marshbanks, board member of the National Air Duct Cleaners Association (NADCA).
Read More
• John P. Lapotaire, CIEC
• Certified Indoor Environmental Consultant
• Microshield Environmental Services, LLC
• www.Microshield-ES.com
Share this with the #IAQS:
Leave a Comment » |
Commercial IAQ, Residential IAQ | Tagged: air quality, ASTM, Chapter 468, ciec, Department of Business and Professional Regulation, Florida DBPR, Florida Statutes, HB 4171, HB 5005, HB 5007, healthy home, House Bill 713, IEQ 3.2, IESO, indoor air quality, Indoor Environmental Standard Organization, john lapotaire, John P. Lapotaire, LEED, microshield, mold, mold inspection, mold pretreatment, mold prevention, mold remediation, mold removal, mold testing, Mold-Related Services Licensing Program, new home mold, Part XVI, PCB BCAS 11-01, Residential Mold Assessment, SB 1244, Senate Bill 2234, USGBC |
Permalink
Posted by John P. Lapotaire, CIEC
October 26, 2011
So Md News
Chip Jackson, associate vice president for planning and facilities, said the college is working on a plan with construction contractors now for the mold remediation and said it would be “at least a couple weeks” before students move back into the residence halls. He said he hopes the work will be done before the end of the semester, which is in mid-December. “Any institution will have a mold issue here, a mold issue there,” Jackson said, but this systemic mold problem is so severe that it is forcing the evacuations of both Prince George and Caroline residence halls.
Read More
• John P. Lapotaire, CIEC
• Certified Indoor Environmental Consultant
• Microshield Environmental Services, LLC
• www.Microshield-ES.com
Share this with the #IAQS:
Leave a Comment » |
Commercial IAQ, Residential IAQ | Tagged: air quality, ASTM, Chapter 468, ciec, Department of Business and Professional Regulation, Florida DBPR, Florida Statutes, HB 4171, HB 5005, HB 5007, healthy home, House Bill 713, IEQ 3.2, IESO, indoor air quality, Indoor Environmental Standard Organization, john lapotaire, John P. Lapotaire, LEED, microshield, mold, mold inspection, mold pretreatment, mold prevention, mold remediation, mold removal, mold testing, Mold-Related Services Licensing Program, new home mold, Part XVI, PCB BCAS 11-01, Residential Mold Assessment, SB 1244, Senate Bill 2234, USGBC |
Permalink
Posted by John P. Lapotaire, CIEC
August 3, 2011
When Filing Insurance Claims:
When filing your claim, complete a precisely detailed estimate of what is required to repair or rebuild your property. Assist in the preparation of inventories for damaged personal property, contents, and related items. With your help in providing correct documentation, and determining ages, descriptions and determine the approximate current values.
Have your losses or additional living expenses ready to submit in your claim. Establish a professional line of communications with the insurance adjuster and present estimates, inventories, and other valuations to the insurance adjuster.
A Public Adjuster can meet with your insurance company to adjust your claim fairly and equitably, thus resulting in an acceptable settlement to you.
You will need a very well written report detailing all Hurricane and Storm related damages with photos.
• John P. Lapotaire, CIEC
• Certified Indoor Environmental Consultant
• Microshield Environmental Services, LLC
• www.Microshield-ES.com
Share this with the #IAQS:
1 Comment |
Commercial IAQ, Flood Information, Hurricane Information, Residential IAQ, Storm Damage Information | Tagged: air quality, ASTM, Chapter 468, ciec, Department of Business and Professional Regulation, Florida DBPR, Florida Statutes, HB 4171, HB 5005, HB 5007, healthy home, House Bill 713, IEQ 3.2, IESO, indoor air quality, Indoor Environmental Standard Organization, john lapotaire, John P. Lapotaire, LEED, microshield, mold, mold inspection, mold pretreatment, mold prevention, mold remediation, mold removal, mold testing, Mold-Related Services Licensing Program, new home mold, Part XVI, PCB BCAS 11-01, Residential Mold Assessment, SB 1244, Senate Bill 2234, USGBC |
Permalink
Posted by John P. Lapotaire, CIEC
August 3, 2011
The Saffir/Simpson Hurricane Scale
A 1-5 rating based on a hurricane’s present intensity, used to give an estimate of the potential property damage and flooding expected along the coast from a hurricane landfall. Wind speed is the determining factor in the scale, as storm surge values are highly dependent on the slope of the continental shelf in the landfall region.
Category 1
Winds 74-95 mph (64-82 knots or 119-153 km/hr) – Storm surge generally 4-5 ft above normal. No real damage to building structures. Damage primarily to unanchored mobile homes, shrubbery, and trees. Some damage to poorly constructed signs. Also, some coastal road flooding and minor pier damage.
Category 2
Winds 96-110 mph (83-95 knots or 154-177 km/hr) – Storm surge generally 6-8 feet above normal. Some roofing material, door, and window damage of buildings. Considerable damage to shrubbery and trees with some trees blown down. Considerable damage to mobile homes, poorly constructed signs, and piers. Coastal and low-lying escape routes flood 2-4 hours before arrival of the hurricane center. Small craft in unprotected anchorages break moorings.
Category 3
Winds 111-130 mph (96-113 knots or 178-209 km/hr) – Storm surge generally 9-12 ft above normal. Some structural damage to small residences and utility buildings with a minor amount of curtainwall failures. Damage to shrubbery and trees with foliage blown off trees and large tress blown down. Mobile homes and poorly constructed signs are destroyed. Low-lying escape routes are cut by rising water 3-5 hours before arrival of the hurricane center. Flooding near the coast destroys smaller structures with larger structures damaged by battering of floating debris. Terrain continuously lower than 5 ft above mean sea level may be flooded inland 8 miles (13 km) or more. Evacuation of low-lying residences with several blocks of the shoreline may be required.
Category 4
Winds 131-155 mph (114-135 knots or 210-249 km/hr) – Storm surge generally 13-18 ft above normal. More extensive curtainwall failures with some complete roof structure failures on small residences. Shrubs, trees, and all signs are blown down. Complete destruction of mobile homes. Extensive damage to doors and windows. Low-lying escape routes may be cut by rising water 3-5 hours before arrival of the hurricane center. Major damage to lower floors of structures near the shore. Terrain lower than 10 ft above sea level may be flooded requiring massive evacuation of residential areas as far inland as 6 miles (10 km).
Category 5
Winds greater than 155 mph (135 knots or 249 km/hr) – Storm surge generally greater than 18 ft above normal. Complete roof failure on many residences and industrial buildings. Some complete building failures with small utility buildings blown over or away. All shrubs, trees, and signs blown down. Complete destruction of mobile homes. Severe and extensive window and door damage. Low-lying escape routes are cut by rising water 3-5 hours before arrival of the hurricane center. Major damage to lower floors of all structures located less than 15 ft above sea level and within 500 yards of the shoreline. Massive evacuation of residential areas on low ground within 5-10 miles (8-16 km) of the shoreline may be required.
• John P. Lapotaire, CIEC
• Certified Indoor Environmental Consultant
• Microshield Environmental Services, LLC
• www.Microshield-ES.com
Share this with the #IAQS:
Leave a Comment » |
Commercial IAQ, Flood Information, Hurricane Information, Residential IAQ, Storm Damage Information | Tagged: air quality, ASTM, Chapter 468, ciec, Department of Business and Professional Regulation, Florida DBPR, Florida Statutes, HB 4171, HB 5005, HB 5007, healthy home, House Bill 713, IEQ 3.2, IESO, indoor air quality, Indoor Environmental Standard Organization, john lapotaire, John P. Lapotaire, LEED, microshield, mold, mold inspection, mold pretreatment, mold prevention, mold remediation, mold removal, mold testing, Mold-Related Services Licensing Program, new home mold, Part XVI, PCB BCAS 11-01, Residential Mold Assessment, SB 1244, Senate Bill 2234, USGBC |
Permalink
Posted by John P. Lapotaire, CIEC
August 2, 2011
The flooding of your home by untreated or inadequately treated groundwater is responsible for a number of outbreaks of gastrointestinal illnesses that occur every year throughout the United States. In many of these outbreaks, sewage was most often identified as the contamination source.
Past flooding events in Florida have created sewage contamination problems, however simple testing solutions can provide fast information to business and homeowners.
Here at Microshield Environmental Services, LLC, we test for sewage contamination by testing for certain indicator organisms (total coliforms, fecal coliforms, E.coli, and Enterococcus). These indicator organisms are assumed to be indigenous to feces, and thus their presence in environmental samples is indicative of fecal contamination. We also provide our clients with more definitive answers by testing for individual pathogens such as Salmonella, Giardia, and Cryptosporidium.
If you think you have a sewage, bacteria, or mold contamination problem, either in ground water or other bulk material, please contact Microshield Environmental Services, LLC. for information on your indoor environmental testing needs.
• John P. Lapotaire, CIEC
• Certified Indoor Environmental Consultant
• Microshield Environmental Services, LLC
• www.Microshield-ES.com
Share this with the #IAQS:
Leave a Comment » |
Commercial IAQ, Flood Information, Hurricane Information, Residential IAQ, Storm Damage Information | Tagged: air quality, ASTM, Chapter 468, ciec, Department of Business and Professional Regulation, Florida DBPR, Florida Statutes, HB 4171, HB 5005, HB 5007, healthy home, House Bill 713, IEQ 3.2, IESO, indoor air quality, Indoor Environmental Standard Organization, john lapotaire, John P. Lapotaire, LEED, microshield, mold, mold inspection, mold pretreatment, mold prevention, mold remediation, mold removal, mold testing, Mold-Related Services Licensing Program, new home mold, Part XVI, PCB BCAS 11-01, Residential Mold Assessment, SB 1244, Senate Bill 2234, USGBC |
Permalink
Posted by John P. Lapotaire, CIEC
August 2, 2011
Storm Damage Assessment and Environmental Testing
National attention has brought mold and indoor air quality to the forefront of your clients’ concerns. Many clients have become knowledgeable about mold infestations and health issues.
By understanding what is hype and what is truth, you can recommend a certified Indoor Air Quality Specialist who will assess and analyze the property. The solutions recommend by a specialist will allow you and your client to move forward with the transaction quickly, efficiently, and effectively.
After The Clean Up Make Sure Your Home Is Free Of ;
- Mold
- Bacteria
- Sewage Contamination
- E. Coli
- Fecal Coliform
- Fecal Streptococcus
- Legionella
- MRSA
Being equipped with some basic knowledge, you can be better prepared to address this problem more effectively the next time in happens.
Contact MicroShield Environmental Services today.
MicroShield Environmental Services, LLC & John P. Lapotaire, CIEC
The most trusted names in Indoor Air Quality (IAQ)
www.microshield-es.com
• John P. Lapotaire, CIEC
• Certified Indoor Environmental Consultant
• Microshield Environmental Services, LLC
• www.Microshield-ES.com
Share this with the #IAQS:
Leave a Comment » |
Commercial IAQ, Flood Information, Hurricane Information, Residential IAQ, Storm Damage Information | Tagged: air quality, ASTM, Chapter 468, ciec, Department of Business and Professional Regulation, Florida DBPR, Florida Statutes, HB 4171, HB 5005, HB 5007, healthy home, House Bill 713, IEQ 3.2, IESO, indoor air quality, Indoor Environmental Standard Organization, john lapotaire, John P. Lapotaire, LEED, microshield, mold, mold inspection, mold pretreatment, mold prevention, mold remediation, mold removal, mold testing, Mold-Related Services Licensing Program, new home mold, Part XVI, PCB BCAS 11-01, Residential Mold Assessment, SB 1244, Senate Bill 2234, USGBC |
Permalink
Posted by John P. Lapotaire, CIEC