Dusty decorations, Christmas trees and cold weather can touch off allergies, asthma

December 14, 2010

By Irene Maher, Times Staff Writer
In Print: Thursday, December 2, 2010

Time to pull the boxes out of the attic, hang up the wreath and wrap your house in lights and garland. Holiday decorations are making their annual debut, to the delight of children of all ages — and to the misery of many who suffer from asthma and allergies.

“You disturb dust and other debris that hasn’t been touched for a year,” says Dr. Richard Lockey, director of the division of allergy and immunology at USF Health, “and it can certainly cause problems.”

And, as if right on cue, colder temperatures have arrived in the bay area, another potential trigger for asthma.

If your symptoms have been under good control but lately you are short of breath, sneezing, wheezing, coughing, have itchy watery eyes, or a runny or stuffy nose, the problem may be seasonal in the fullest sense of the word.

On top of stored decorations, bringing fresh Christmas trees, wreaths, garlands and holiday plants inside can also trigger symptoms. Some people are allergic to a substance called terpene in the sap of evergreens that is released when the trunk or branches are cut. “We’re not sure it’s a true response to evergreens, but there’s no question that some people feel cut Christmas trees make their asthma worse,” says Lockey.

Sometimes trees and plants carry mold or pollen indoors on their branches. Artificial trees can become covered in sneeze-inducing dust if not stored in airtight containers. The American College of Allergy, Asthma and Immunology suggests going over your tree with a leaf blower in a well-ventilated place outside to remove some of the accumulated allergens. Or spray your holiday tree, live or artificial, with a garden hose and allow it to dry in a garage or on a covered porch before bringing it inside.

By the same token, take dusty boxes of decorations outside to clean them off before bringing them into living areas.

As if all those seasonal hazards weren’t enough, consider this: According to the U.S. Department of Housing and Urban Development most of us spend 90 percent of our time indoors — and indoor air can be more harmful than what’s outdoors.
From things you can smell, like oven cleaners and bathroom mold, to those that are odorless, like carbon monoxide and radon, indoor air can be hazardous to your health.

Finding the problems

Annette Douglas, 48, of Largo recently requested an inspection from the Pinellas County Health Department’s Indoor Air Quality Program. She was concerned after a messy plumbing problem left a foul smell in her apartment for weeks, even after professional carpet cleaning. Having just had surgery, she worried that an environmental problem might affect her healing.

Stan Stoudenmire, one of two environmental specialists who cover Pinellas, says most of the calls he gets are over concerns about mold. In addition to common allergens, cigarette smoke, wood smoke, carbon monoxide, off-gassing from new carpets and furniture, sewer gases, household pesticides and cleaning supplies can cause symptoms such as headaches, eye, nose and throat irritation, breathing problems, fatigue, reduced productivity, even memory problems, he said.

“We get anywhere from five to 20 calls a day. Physicians will recommend us if a medical approach doesn’t seem to help a patient with symptoms,” he says.

After visiting Douglas’ home Wednesday, Stoudenmire says he found a very moldy air handler and old carpeting, which can harbor dust mites. Both can aggravate allergies and asthma, and Douglas told him that when her grandchildren come to visit, their asthma symptoms do worsen. He took some dust samples back to the office for further checking; it usually takes a week to get a full report.

A home inspection costs $75; many people qualify for a reduced or no-fee visit. Inspections at businesses start at $350.

Most people notice improvement after a good housecleaning and changing air filters, Stoudenmire says. Sometimes plumbing and roof work are needed to repair leaks, or air handlers need professional cleaning to remove mold. In extreme cases, damp or moldy drywall may have to be replaced.

But Stoudenmire cautions consumers against private companies that offer inspections and then try to sell you a long list of repair services.

“They’ll come in and tell you to tear out walls, cabinets, plumbing fixtures. If it sounds like you suddenly have an enormous problem and lots of costly repairs, beware,” he says. He advises getting a second opinion before doing anything drastic.

•John P. Lapotaire, CIEC
•Certified Indoor Environmental Consultant
•Microshield Environmental Services, LLC
www.Microshield-ES.com www.CFL-IAQ.com


Orlando Mold Inspections

December 12, 2010

Molds would perhaps be one in all the very first annoying things to have inside the house. There would be times when you would just want these things to be gone from the house but things such as mold removal or mold inspection or infrared inspections are not as easy as it might sound. If you feel that you want to enhance your indoor air quality, you need to go for either indoor allergen testing or thermal imaging inspections. Doing these things all by yourself might mean risking your own self. For that reason it would be a better option to consult Orlando Mold inspection companies. The professionals of those companies are expert at these and have a lot of experience.

There are in fact a number of different Orlando Mold inspections Companies in the city. But out of those which is the one that you would like? There are a few reputed companies which had been serving the city of Orlando for years in helping to fight those annoying organisms. It is undoubtedly true that when it concerns mold inspections Orlando Mold inspection companies of the city have appeared to be the first and the last choice of the majority of people. The companies make sure that they provide and do the suitable steps to fight as well as prevent those toxic and annoying molds.

Orlando Mold inspection companies are concerned about the health of people, and moreover the companies are also concerned with the dangers which their employees tend to face each time they conduct Orlando Mold inspections. The companies make certain that their employees are completely equipped with everything that is required as well as all data. Their employees are properly trained as well. In addition, the workers follow a specific guide to inspecting mold. These Orlando Mold inspection company professionals would work in a manner as you would want them to.

1. The companies send certified technicians for examining the mold affected area thoroughly. These professionals are people who do the inspection and investigation.

2. As soon as the technicians have taken a note and diagnosed some area having black mold growth, they would immediately take a sample from that surface as well as from the air around mold. That way, they are able to compare whether the amount of mold exist enormously on the surfaces of your house or not.

3. Apart from their visual assessment as well as taking samples, the technicians would in addition make use of infrared cameras which would be helpful in evaluating and diagnosing the source of moisture inside the house. This is one of the very essential steps in mold inspection, and without doing this, it could be extremely difficult to understand how to take care of mold properly.

4. Since, nowadays, technicians have samples; they might get their comparisons and assessments done. This could be the time when the mold inspection companies of Orlando would be sending those samples to the laboratory for inspection.

5. At the end the technicians come up with suitable action on how to keep these toxic organisms from growing in the house again.

•John P. Lapotaire, CIEC
•Certified Indoor Environmental Consultant
•Microshield Environmental Services, LLC
www.Microshield-ES.com


Thermal Imaging Inspection Over Home Inspection

December 9, 2010

If you ever have purchased a house or are planning to purchase your very first home, no doubt you know it already that it is sensible in having a home inspection as one of the many conditions in the agreement of purchase and sale. You could as well wish to consider adding thermal imaging inspections also. One of the prime things which is required to be borne in mind during the purchase of a house is the atmosphere around the house. If it is a humid atmosphere, then be sure of the growth of molds within the house.

These are extremely toxic organisms and could turn out to be fatal in severe cases. There must be a control to their growth. Where mold growth control is concerned, there could be nothing better than Orlando mold inspection companies. These companies utilize several methods in keeping the indoor air quality of the house clean and fresh. Some of their methods include infrared inspections, indoor allergen testing and last but not the least, thermal imaging inspections.

Rather new to residential real estate market, the thermal imaging inspections might turn out to be a stable fixture for every real estate transaction in nearly the similar fashion as that of what traditional home inspections had been for a long time.

What are Thermal Imaging Inspections?
Unlike the traditional home inspection that could be seen, thermal imaging inspections are able to debunk problems which remain hidden to the naked eye. Thermal imaging inspections make use of infrared cameras that provide very useful information with problems like those of energy loss, water leakage in the basements, wood destroying influx as well as electrical faults.

Mold Growth
Traditional home inspectors would generally inform you that they are unaware of any mold issues beyond what could be found on the surface. In case there has been mold growth behind tiles or paneling for instance it might not be clearly visible on the surface and has every reason for going undetected. Thermal imaging inspections would show up the issue to you.

Water Leaks
Often traditional home inspectors would find water leaks in ceilings or basements which could be seen on the surface. Thermal imaging inspections would reveal if the problem continues to exist as well as the source of the problem.

Energy Loss
The effective use of energy tends to be the main concern for home buyers these days. Thermal inspections reveal where heat loss is taking place around doors, windows, attics and ceilings.

Thermal imaging inspections are able to detect the following problems which are not visible through some surface inspection:

• Congested electrical circuits
• Hidden electrical faults which could cause fire
• Unseen leaks in the roof
• Un-insulated wires
• Hidden leaks in plumbing setup
• Any structural defect or problem
• Leaks in Air conditioner compressor

If you’re close to purchasing a home of your own, it is possibly a great idea to consider adding thermal imaging inspections. For the majority of people, this could be the sole largest lifetime investment. This is very useful in knowing the actual condition of the home where a person intends to live for the rest of his life.

•John P. Lapotaire, CIEC
•Certified Indoor Environmental Consultant
•Microshield Environmental Services, LLC
www.Microshield-ES.com


Top 8 Ways Of Improving Your Indoor Air Quality

December 4, 2010

You might not be able to realize it but indoor air quality of your house or even your office might be worse than you can ever imagine. Orlando mold inspection companies are experts in improving your indoor air quality. These companies use methods like infrared inspections, indoor allergen testing, as well as thermal imaging inspections.

The quality of indoor air gets poorer during the winter months when the windows and the doors are kept close for long periods of time. The stale warm air gets circulated all over the place. Surveys have proved that during the winter months indoor air quality gets 10 times worse than during other seasons. To keep healthy, you must breathe fresh air. Given below are 8 tips which could help you in improving your indoor air quality.

1. Beautify with Indoor Plants: The natural purification of plants are done by plants. There are a whole lot of chemicals which cause poor indoor air quality and several others which make us sick. Live indoor plants are the best way to combat these and keep indoor air clean and fresh.
2. Never Smoke Indoors: This is a pretty obvious tip, but challenging to regular smokers. For protecting indoor air quality and freshness people must not smoke within the house, but outside it.
3. Cleaning Humidifiers and Shower Curtain: Moist environments encourage mold growth. The shower curtain must be replaced if there is a large amount of mold on it. In case of minimum mold, the shower curtain could be cleaned with some household cleaner and rinsed properly before re-hanging.
4. Plant’s Soil Must Be Checked for Mold: The potting soil of the plant might have mold growing in it. In that case, it must be replaced with new soil. This would help in improving the indoor air quality. Over watering the plants leads to the growth of molds. So, that should be not be done
5. Changing Air Filters: For improving indoor air quality, all air filters must be changed often. Filters get filled with dust and other particles very easily. But these filters are also very helpful in keeping the indoor air clean and dust-free.
6. Using Ventilating Fans: These fans ventilate the spaces where they are placed. They are placed usually in the bathrooms and kitchens. These fans pull out the unclean air out of the house.
7. Dust and Vacuum: Vacuuming carpets is an obvious task. But besides carpets, other areas like drapes and furniture must be dusted and vacuumed as well. For such work, the best option is to get for yourself a small vacuum cleaner that could be held and operated by hand.
8. Let In Some Fresh Air: This might not be a very pleasant thing for doing in winter. The obvious reason is the low temperatures outside. Nut, it could be possible to let in air for the time you are not at home. Letting in of fresh air actually makes a lot of difference, which you can notice.

If these steps are properly followed the indoor air quality of your house or your office would improve significantly. This would result not only in making a good environment, but also a healthier environment.

•John P. Lapotaire, CIEC
•Certified Indoor Environmental Consultant
•Microshield Environmental Services, LLC
www.Microshield-ES.com


Attention Florida Mold Assessors and Remediators!

December 1, 2010

From the IAQA As you already may know, according to the new Mold law passed by the state of Florida, all individuals performing mold assessment and/or remediation must be licensed through the Florida Department of Business and Professional Regulation as of July 1, 2010. This law was amended last May to give applicants more time to complete necessary education, experience, and testing requirements. The new date to be grandfathered in is March 1, 2011. To find out more about this bill and application requirements, visit their website HERE.

In case you’re scrambling to get your education verification in order or need help studying up for the exam, consider taking a course through an IAQA course provider! IAQA courses have gone through extensive review by a board of industry experts and are approved to prepare students for the certification exams offered through the American Council for Accredited Certification (ACAC). IAQA courses and ACAC exams have all been registered and approved by the state of Florida for the new Mold-Related Services Licensing program. To find out where IAQA courses are, visit our Education page HERE.

Of course, we are always here to answer questions. Feel free to contact us at info@iaqa.org or 301-231-8388.

Thank you. IAQA Staff

•John P. Lapotaire, CIEC
•Certified Indoor Environmental Consultant
•Microshield Environmental Services, LLC
www.Microshield-ES.com


The Florida Mold Law Defines Mold Remediation

November 27, 2010

Florida Mold Law 468.8411 Definitions.–As used in this part, the term:

“Mold remediation” means the removal, cleaning, sanitizing, demolition, or other treatment, including preventive activities, of mold or mold-contaminated matter of greater than 10 square feet that was not purposely grown at that location; however, such removal, cleaning, sanitizing, demolition, or other treatment, including preventive activities, may not be work that requires a license under chapter 489 unless performed by a person who is licensed under that chapter or the work complies with that chapter.

“Mold Remediator” means any person who performs mold remediation. A mold remediator may not perform any work that requires a license under chapter 489 unless the mold remediator is also licensed under that chapter or complies with that chapter.

•John P. Lapotaire, CIEC
•Certified Indoor Environmental Consultant
•Microshield Environmental Services, LLC
www.Microshield-ES.com


The Florida Mold Law Defines Mold Assessment

November 27, 2010

Florida Mold Law 468.8411 Definitions.–As used in this part, the term:

“Mold assessment” means a process performed by a mold assessor that includes the physical sampling and detailed evaluation of data obtained from a building history and inspection to formulate an initial hypothesis about the origin, identity, location, and extent of amplification of mold growth of greater than 10 square feet.

“Mold assessor” means any person who performs or directly supervises a mold assessment.

•John P. Lapotaire, CIEC
•Certified Indoor Environmental Consultant
•Microshield Environmental Services, LLC
www.Microshield-ES.com


Indoor Air Pollution and Health

November 27, 2010

Health effects from indoor air pollutants may be experienced soon after exposure or, possibly, years later.

Immediate effects

Immediate effects may show up after a single exposure or repeated exposures. These include irritation of the eyes, nose, and throat, headaches, dizziness, and fatigue. Such immediate effects are usually short-term and treatable. Sometimes the treatment is simply eliminating the person’s exposure to the source of the pollution, if it can be identified. Symptoms of some diseases, including asthma, hypersensitivity pneumonitis, and humidifier fever, may also show up soon after exposure to some indoor air pollutants.

The likelihood of immediate reactions to indoor air pollutants depends on several factors. Age and preexisting medical conditions are two important influences. In other cases, whether a person reacts to a pollutant depends on individual sensitivity, which varies tremendously from person to person. Some people can become sensitized to biological pollutants after repeated exposures, and it appears that some people can become sensitized to chemical pollutants as well.

Certain immediate effects are similar to those from colds or other viral diseases, so it is often difficult to determine if the symptoms are a result of exposure to indoor air pollution. For this reason, it is important to pay attention to the time and place symptoms occur. If the symptoms fade or go away when a person is away from home, for example, an effort should be made to identify indoor air sources that may be possible causes. Some effects may be made worse by an inadequate supply of outdoor air or from the heating, cooling, or humidity conditions prevalent in the home.

Long-term effects

Other health effects may show up either years after exposure has occurred or only after long or repeated periods of exposure. These effects, which include some respiratory diseases, heart disease, and cancer, can be severely debilitating or fatal. It is prudent to try to improve the indoor air quality in your home even if symptoms are not noticeable.

While pollutants commonly found in indoor air are responsible for many harmful effects, there is considerable uncertainty about what concentrations or periods of exposure are necessary to produce specific health problems. People also react very differently to exposure to indoor air pollutants. Further research is needed to better understand which health effects occur after exposure to the average pollutant concentrations found in homes and which occurs from the higher concentrations that occur for short periods of time.

•John P. Lapotaire, CIEC
•Certified Indoor Environmental Consultant
•Microshield Environmental Services, LLC
www.Microshield-ES.com


Radon Discovered in Florida Homes and Condos

November 27, 2010

Radon exceeding EPA limits has been discovered in Florida homes and condos. Several independent studies have concluded the source is contaminated concrete.
Palm Beach, FL (Vocus) November 10, 2010

“You probably thought radon was only found in northern states with rocky soil, well guess again because it’s being discovered in homes and condos all over Florida,” according to Kevin Dickenson, a Palm Beach real estate agent with Prudential Florida Realty (http://www.kevindickenson.com).

Radon is the second leading cause of lung cancer and is responsible for more deaths every year than drunk drivers, according to the EPA. Radon is a naturally occurring, odorless and colorless radioactive gas that can be found in soil, granite, concrete and water. Before you get too excited, radon is also found in the air we breathe, and depending upon where you live, it can be as high as 0.75 pCi/L (picocuries per liter) according to Air Chek, Inc.

The EPA recommends fixing your home if radon levels are 4.0 pCi/L or higher.

“It’s simple to test your home with a do-it-yourself radon test kit for as little as $15, or you can hire a certified Florida Department of Health inspector”, says Dickenson. “The passive kits work great, but only if you are in complete control of the test conditions and follow the protocol.” The 48 hour charcoal kit is easily manipulated by opening a window or moving it outside and you should hire an inspector that uses a continuous monitor if you suspect someone may tamper with the test.”

“I recently documented radon levels that were two to three times the EPA limit in a newer high-rise Palm Beach condo, but the levels measured were minimal compared to my hometown in Connecticut,” said Dickenson. CT Radon reported radon levels as high as 483 pCi/L in a basement and 660,000 pCi/L in a private well. According to this site, one in four basements in Connecticut has radon levels above the EPA limit.

So where is radon coming from in Florida? “In Naples, it’s well-known that the concrete is the primary source of radon, and as a result, most developers incorporate fresh air systems in the initial design,” stated Dickenson. Bill Brodhead of WPB Enterprises, Inc. conducted a comprehensive study on a Palm Beach condo and reached a similar conclusion.

There is also speculation that granite counters could contribute to high radon levels, but a comprehensive study in 2008 by Environmental Health and Engineering, Inc disagrees. The company studied 400 granite slabs from 115 different varieties and concluded that the radon level emitted by the granite is consistently lower than the background level of radon found outdoors.

“The solution in Florida is to bring in fresh air, but systems vary widely and you should hire a Florida Department of Health certified mitigator for the installation,” said Dickenson. “The EPA website does a great job of describing mitigation systems for basements up north, but they don’t address systems for humid climates where the source is the concrete.” “I’ve seen plenty of fresh air systems that have created major mold problems and this compelled me to form http://www.Florida-Radon.blogspot.com." The site contains links to studies, test kits, certified inspectors and photos of actual fresh air systems.

“Building codes have changed dramatically over the years with the advent of impact windows and super insulating materials, and as a result, our homes don’t breathe,” said Dickenson. “Toxins from laminated floors, carpeting, radon, paint, glues and other materials build up inside our homes and I think most doctors would agree that adding fresh air to a home is actually a good thing.” After all, Florida building codes require fresh air systems in our commercial buildings and schools, so why isn’t it required in our homes?

Read more: http://www.benzinga.com/press-releases/10/11/p596744/radon-discovered-in-florida-homes-and-condos#ixzz16Vi8rOmA

•John P. Lapotaire, CIEC
•Certified Indoor Environmental Consultant
•Microshield Environmental Services, LLC
www.Microshield-ES.com


Florida Mold Law Protects Consumers

November 27, 2010

Orlando Sentinel
November 25, 2010|By Jim Ilardi

I applaud the Orlando Sentinel for its special report last month that has brought attention to the issue of toxins in our schools. Mold is not an isolated problem, but rather a symptom of other moisture-related issues. Without identifying the cause and implementing a feasible long-term fix, along with a sound preventive-maintenance program, mold will continue to thrive.

The good news is that once the moisture-related issues have been addressed, the protocol for mold remediation is straightforward. The Florida Mold Bill is now law and went into effect in July to establish professional standards for those who perform mold assessment and remediation in our state.

The three key components of the law that everyone should know about when they suspect they have mold and need a remediation contractor are as follows:
Ensure that your remediation contractor is certified through the American Council for Accredited Certification, the exclusive provider of remediation licenses for the Florida Department of Business and Professional Regulation.

Ensure that your remediation contractor carries “mold specific” pollution-liability coverage. General liability will not cover mold.

Note that the company that performs the assessment cannot also be the same company that performs the remediation. This instills third-party accountability and holds the contractors responsible for ensuring the remediation was performed to protocol.

The legislative purpose, as listed in the statute, says: “The Legislature finds it necessary in the interest of the public safety and welfare, to prevent damage to real and personal property, to avert economic injury to the residents of this state, and to regulate persons and companies that hold themselves out to the public as qualified to perform mold-related services.”

By hiring only certified professionals and implementing a level of accountability to the industry, we will see a dramatic decline in the amount of repeat work required to perform mold remediation, reducing both health risks and costs.

It’s a simple principle: Do it right the first time, and you won’t pay for it later.

However, when it comes to our schools, state and municipal employees who perform remediation are exempt from these same professional standards. Shouldn’t “public safety and welfare” extend to where our children go to school? Shouldn’t we be “averting economic injury” in our school systems as well?

We need to take a common-sense approach toward providing cost-effective solutions, rather than waste money on replicating existing flaws. The protocol has been established. Now we simply have to apply it.

•John P. Lapotaire, CIEC
•Certified Indoor Environmental Consultant
•Microshield Environmental Services, LLC
www.Microshield-ES.com